2 color Waterproof Reflective Universal Car the Whole body sticker icon for SUZUKI JIMNY sx4 All-terrain Vehicles 4WD black and Silver
This product is composed of three parts.The upper layer is a transparent transfer film, the middle layer is the main body, the bottom is the bottom film.
Paste Tools: Cloth, Scraper or Credit Card.
1.Will the car body clean, and keep the car body dry.
2.Please make sure to paste position and slowly paste, paste at the same time, please use tools to sticker scraping flat, Until the film have been torn down.
3.Then paste after repeated scraping and pressing, then slowly tear the transparent film.
4.Press the tear film after the sticker, Until flat,Don’t let the car stickers and have any physical separation or protrusions.
5.In the case of conditions, can moderate heating, to ensure that the sticker can be better and more firmly stuck in the car body.
Please wash your car in 2-3 days, thank you！
Wipe clean the window or surface you are applying the decal to with a mild cleaner. Allow to dry.
Carefully peel off the backing layer from the decal. (Only the vinyl and the clear transfer layer should remain).
Place your decal on the window. Use a credit card to rub and smooth the decal onto the window.
Now remove the clear transfer layer by peeling it off starting from the corner. (Only the vinyl decal should remain).
Detailed Car Decal Installation Instructions
- Small Decal Installation: This can be done by removing the backing layer, then, holding the transfer and vinyl layers with both hands stick your decal to your desired spot, then after rubbing over it with a card or squeegee, remove the transfer layer. All that should remain on your surface is the die-cut car decal.
- Larger Decal Installation: We recommend a friend or masking tape to assist you. With the backing paper still on, affix your decal into your desired position by putting masking tape along the length of an edge of your decal. This becomes a hinge. Flip the decal over along this hinge. Carefully peel off the backing paper entirely. Now lift the end of the transfer layer (opposite the hinge) with one hand, while using a card or squeegee with your other hand to rub the decal firmly onto your surface. Then remove the transfer layer and enjoy. All that should remain on your surface is the die-cut car decal.
Car Decal Removal
From Glass: Use a razorblade or scraper (metal or plastic) to lift an edge of the vinyl until you can grab it with your fingers and peel off.
From Vehicle Body: Use a plastic razorblade or scraper so you don’t scratch your clear coat.
Tips: For stubbornly stuck vinyl, heat mildly with a heat gun or hair dryer, then use above methods.
1.China Post Ordinary Small Packet Plus. China Post Registered Air Mail.The shipping time during Holiday or Custom Season could be longer than usual time. Please add another 5-10 days as a delay.(When the buyer orders less than $7. We will send the China Post Ordinary Small Packet Plus. It’s not on any other website can query the tracking information. Generally can reach 20 to 60 days.)
1.100% guarantees new good with good condition .
2. If you are unhappy with your item, Please contact us before you leave bad feedback or make issue, which is not helpful and friendly.
3. Return and change is available now. Buyer need to take care return shipping fee. And please contact us first when you want to return or change.
4.Please confirm the delivered ASAP when you get your parcel. If still nothing turns up until the estimated time please ask us extend the time 🙂
1.We focus on car stickers. Because focus, so professional