Custom Decal for Emil

Description

Description

Packing: opp bag
Applicable models: General
Scope: Car window / Car body
Production process: UV PRINT STICKER

This product is composed of three parts. The upper layer is a transparent transfer film, the middle layer is the main body, the bottom is the bottom film.

UV DTF Sticker Instructions

How to Apply:

1. Clean: Wipe the surface with alcohol or a dry cloth to remove dirt and oil.

2. Peel: Slowly peel off the backing paper, keeping the sticker on the top clear transfer film.

3. Stick & Scrape: Place the sticker on the target area and scrape firmly from the center outwards to remove air bubbles.

4. Remove Film: Peel off the clear transfer film at a flat 180° angle against the surface.

How to Remove:

1. Heat: Use a hairdryer to heat the sticker for 10–15 seconds to soften the adhesive.

2. Peel: Gently lift the edge with your fingernail or a plastic scraper and peel it off slowly.

3. Clean Residue: Wipe away any remaining glue with rubbing alcohol, Goo Gone, or nail polish remover.

Important Notes:

• Best Bond: Let it set for 24 hours after applying for maximum adhesion.

• Suitable For: Hard, smooth surfaces (glass, plastic, metal, ceramic, wood).

• Not Suitable For: Fabric, clothing, rubber, silicone, or rough/textured surfaces.

Attention :
The picture is for reference only, the actual item is the standard.
This is not a window cling or printed decal. It does not have a background, thus a different installation process is required. Please refer to the following instructions.

** CUSTOM DECALS ALWAYS AVAILABLE **
Don’t see what you are looking for? Feel free to contact us. Send us a message, we can make decals of almost any design in a variety of sizes and colors.

After shipping, You can track it on our Website. also, you can track it on 17track.